Topsoil Screener SLG 108VF

SLG-108VFRB
Topsoil & Rock Screener

$15,500 USD
$19,900 CDN
With Riser Box

For use with Full Size Excavators, Backhoes & Wheel Loaders

$13,300 USD
$15,800cdn
With Out Riser Box

For use with Compact Loaders, Compact Excavators & Skidsteers

The SLG 108VFRB is our big dog screener, designed to be fed with up to a 9ft 3 yard bucket. The SLG 108 has a 6ft x 10ft screen deck that will screen from 30 to 60 yards per hour depending upon mesh size material and moisture levels. It is powered by dual 110 volt (3600rpm) vibratory packs. It is not only our biggest screener but also our most versatile vibratory screening machine. The SLG 108VF, off the riser can be fed with bucket tractors, compact excavators and skid steers. When up on the riser box the SLG 108VF becomes the 108VFRB designed to be fed with full size excavators, backhoes and wheel loaders. We offer more than a dozen mesh sizes from 1/8 inch to 4 inches for screening everything from sand to soil, compost, gravel rock, recycled asphalt and crushed concrete.
Just like our other models the SLG 108 offers features only found in DeSite designs. Our Tilting screen deck, feed deflector, cantilevered suspension, and quick disconnect riser box makes DeSite screeners the most cost effective and cost efficient screening machines on the market.
topsoil screener onsite feed with large bucket tractor
topsoil screener on-site screening dirt

Tilting Screen Deck

An operators ability to manipulate screen deck slope while screening increases efficiency and will produce more production each hour. The SLG 108VFRB can adjust to varying positions for varying materials with varying moisture levels. The 108 performs well in all soil conditions: wet, dry, sandy, rocky and even frozen soil. To slow material flow the operator needs only to flatten deck slope with the bucket while feeding the screener. Leaving the screener at a steeper slope allows material to travel faster for screening high moisture materials. You will only find this high efficiency feature on a DeSite screening machine.

Eccentric Vibratory Packs

The SLG 108VFRB comes fitted with dual eccentric vibratory pack. The motors turn at 3600rpm and each produce about 760lbs of force as they spin. Inside the starter box are two starting capacitors that store energy to initiate motor start up. When at operating rpm each vibratory pack only draw about 5 amps. Our DeSite eccentric vibratory packs are oil ring sealed to keep dust and moisture out. Electric components is encased in rubber to absorb vibration transferred from the eccentrics.

Feed Deflection System

Only DeSite with its extensive screening experience recognized the need for a Feed Deflection System to direct material flow. Only DeSite SLG screeners offer a deflector to funnel material towards the top of the screen deck to begin the screening process. Directing material flow to the top off the screen deck produces maximum production and maximum efficiency. The SLG 108 deflector has the ability to open and close as needed to handle oversize material. The 108 feed deflector fits into our quick disconnect lugs. Quick disconnect mounting allows for the feeder to be easily removed turning the SLG 108 into a vibrating grizzly screen deck to screen materials like bulky construction demolition debris.

Cantilevered Screen Deck Suspension

Another feature only found on DeSite SLG screeners is our cantilevered suspension system that allows the deck to pivot from 45 degrees for high moisture material all the way back to 30 degrees for sand and soils with low moisture. Only on a DeSite SLG screener does the operator have the ability to flatten the screen deck with the machines bucket while feeding the screener. The cantilevered suspension gives the operator maximum control over the screening process. Having only four grease points the SLG 108 means more time is spent screening and less time is spent on maintenance.

Quick Change Riser Box

The SLG 108 Riser Box is 28 inches tall, 10ft wide with a weight of 750lbs. When on the Riser Box the 108 works efficiently with larger machines like full size excavators, backhoes and wheel loaders. When off the Riser Box the 108 feed height is reduced to 8ft for efficient feeding with skidsteers, compact excavators, and bucket tractors. The 108 screener attaches to the riser with four 4” nylon straps on each corner. Securing 108 to the Rise Box takes less than 5 minutes.

108VF
Riser Box
Topsoil Screener raise on riser box
108VF on Riser Box

Grab and Go Portability

The SLG 108VFRB can be moved around the worksite easily with either forks or with our Bucket Transport Lugs and your machines bucket. Conventional screeners with wheels, axles, and hitches actually can restrict accessibility and portability. The compact design of our SLG 108’s allows our screeners to work in a areas with very limited room and access.

Versatility

Designed to be fitted with mesh both big and small, both square and elongated. Designed to screen everything from sand to soil, compost, rock or materials like crushed concrete. Designed with our removable riser box to be fed with machines both large and small. Designed with a footprint of only 6 feet x 10 feet, the SLG 108VFRB can operate where no other screeners will fit. The SLG 108’s versatility is unmatched and second to none it can be fed with large excavators, backhoes, loaders, skidsteers, compact excavators and bucket tractors.

Excavators
Compact Wheel Loaders
Backhoes
Skid Steers
Wheel Loaders

Low Maintenance

The simplicity of our designs keep operational costs to a minimum. The 108 with only 4 grease points requiring service just once a day means more time screening and less down time servicing. Changing out the screen mesh to a different size only takes about 40 minutes. The SLG 108VFRB can be powered by a compact 5000 watt (110 volt) generator and a 10 gauge cord that can be up to 100ft away from the dust and dirt. The screen deck pivots on springs coils, and UHMW nylon bushings needing no maintenance or service.

Accessories

Bucket Transport Lugs

For moving the SLG 108VFRB around onsite our Bucket Transport Lugs will saves time and the need for having pallet forks onsite. The lugs slide directly into the fork pockets with a retention hole to lock them in place. Once installed you will have the ability to pick up the screener with your bucket and move the screener quickly. No hitch, no wheels, no wiring, and no digging.

 

Transport

The SLG 108VFRB is just over 10ft tall, 6ft deep, and 10ft wide. The SLG 108VFRB weighs in at 5000lbs and be picked up and moved with forks or a bucket. The 108VFRB can be easily transported with a bumper pull or goose neck trailer from site to site.

Affordability

Shop and compare our DeSite SLG 108 with any other vibratory screener offering 60 sq/ft screening surface. Compare the portability. Compare the rugged simplicity, Compare all the features, and then compare the price point and the hourly output of the 108VFRB. We think you will decide that our SLG 108 is the best screening value, best producing screener on the market.

Warranty

The SLG 108VFRB is such a rock solid tough screener that we now offer a 3 YEAR REPLACEMENT WARRANTY on the structure and workmanship when under normal use. All electrical components come with our Standard 1 YEAR IDM WARRANTY.

Mesh Sizes

The SLG-108VFRB comes fitted with our 3/4 x 4” elongated triple chute weave. This is the most commonly requested mesh for screening soil.

We offer mesh in both elongated and square pattern, depending upon the customers needs.

SLG 108VFRB Machine Specifications

Machine Dimensions

  • Machine Width:      123 inches
  • Machine Height:     126 inches
  • Machine Depth:      73 inches

Weight:    5000 pounds

Screen Deck

  • Screen Deck Width:      110 inches
  • Screen Deck Length:    72 inches
  • Screen Deck Surface area:   58 sq/ft
  • Screen Deck Tilt Angle 45 to 30 Degrees
  • Cantilevered screen deck suspension

Screen Deck Suspension

  • Cantilevered       Quad Coil Over Leaf Spring

Vibratory System

  • Vibratory Style      Dual Eccentric Armature
  • Eccentric Rotation 3600 rpm
  • Amperage Draw      5 Amps per motor (3600rpm)
  • Eccentric Force    760 lbs per/revolution
  • North America     110 Volt ( 60 Hertz )
  • Europe     220 Volt ( 50 Hertz )
  • South America     110 Volt ( 60 Hertz )

Productivity

  • 30 to 60 yards per hour depending upon mesh size,
    material, and the size and type of machine feeding the screener.

Click on the picture below to view more videos

Watch Topsoil Screener Videos on YouTube

Screener Line Drawings

SLG108VF Front View

SLG108VF Side View

SLG108VF 3/4 Side View Front

SLG108VF 3/4 Side View Rear

SLG108VFRB Front View

SLG108VFRB Side View

SLG108VFRB 3/4 Side View Front

SLG108VFRB 3/4 Side View Rear

Square

Mesh Size Pattern Product Size
5/32" x 5/32" Square 1/16"
1/4" x 1/4" Square 1/8"
3/8" x 3/8" Square 1/4"
1/2" x 1/2" Square 3/8"
1" x 1" Square 3/4"
2" x 2" Square 1-1/2"
3" x 3" Square 2"
4" x 4" Square 3"

Elongated

Mesh Size Pattern Product Size
3/8" x 4" Elongated 1/4" to 5/16"
1/2" x 4" Elongated 3/8" to 7/16"
3/4" x 4" Elongated 1/2" to 9/16"
1" x 4" Elongated 3/4" to 7/8"

SCREEN AND PRODUCE THE FOLLOWING PRODUCTS

  • Recycled Asphalt
  • Wood Grindings
  • Drainage Rock
  • Pipe Bedding
  • Topsoil Soils
  • Bark Mulch
  • Rocks
  • Dirt
  • Sand
  • Gravel
  • Compost
  • Pea Gravel
  • Winter Sand
  • Septic Stone
  • Decorative Rock