+1 (877) 254-7903

+1 (877) 254-7903

USA Flag Canadian Flag

Great Products at Great Prices
Designed to Perform
Built to Last

SLG-108VFRB Topsoil & Rock Screener


Quick Overview

SLG-108 with Vibratory, Feed Deflector & Riser Box

Prices in USD.


DeSite SLG-108VFRB Specifications

Screen Box

  • Width: 126 inches
  • Height: 122 inches
  • Depth: 72 inches
  • Weight: 4500 pounds
  • Weight: 4900 pounds (with riser)

Screen Deck

  • Width: 109 inches
  • Length: 66 inches

Mesh Opening

  • Width: 66 inches
  • Length: 108 inches
  • Screening Surface Area: 50 sq/ft

Vibratory System

  • Voltage: 110 (USA /CA 60 Hertz)
  • Voltage: 220 (Europe 50 Hertz)
  • RPM: 3600
  • Amperage: 5amps per motor
  • Force: 700ft/lbs
  • Draw: 11 AMPS (at full RPM)
  • Minimum power: 2000watts
  • Vibratory System: Eccentric Rotation


  • 20 to 60 Yards per Hour
  • Feeder System: DeSite Swing Away Design


  • 28 inch Riser Box
  • 25 foot 10 gauge Twist Lock Power Cord
  • 14 Addition Mesh Sizes
Large Topsoil Screener
Large Topsoil Screener
Why Buy a DeSite SLG-108VFRB?
  • Screen sand, soil, rock, compost, wood debris, landscape and construction debris and more!
  • Weighs 3500lbs -(4500 with riser box). Move it easily around your worksite!
  • Can be fed with buckets up to 2 1/2 yards.
  • Can be fitted with mesh from 1/8” to 4”.
  • Shared Centre Rail, side tensioned mesh that changes in minutes.
  • Low maintenance (No engine, belts or bearings service to maintain).
  • Comes with Dual Vibratory Eccentric Motors.
    Operates on 110 Volt electricity or as small as a 3500 watt generator.
  • Attach Riser Box when using Backhoes and Wheel Loaders.
    Remove the Riser Box when using Skidsteers, Tractors, Compact Excavators, and Mini Loaders.
Versatility at its BEST!


The DeSite SLG-108VFRB offers more than 50 square feet of screening surface for $11,200.

Comparable machines begin at more than double the price and then go up from there. The VFRB comes with our feed deflector, screener, riser box and dual vibration packs.

Adjusting the screen deck angle on a topsoil screener
Topsoil screener


The SLG-108VFRB design has lift pockets for quick and easy movement with pallet forks. We also have designed heavy duty 3/4 plate Bucket Lift Lugs that can be inserted into the lift pocket openings for onsite movement using the bucket on your machine.  This gives you the ability to move the screener around the worksite with your bucket so you do not have to change to pallet forks. The ability to move the screener quickly allow the operator to keep the screener close to pile reducing travel time. Short travel distance results in higher production.

Portable topsoil screener
Bucket topsoil screener


The SLG-108VFRB was primarily designed to be fed with Backhoes, Wheel Loaders and Excavators although when the riser box is removed skidsteers and compact loader can be used to feed the screener. The 108VFRB will screen from 30 to 60 yards of material each hour depending upon material, machine feeding the screener, mesh size and material moisture.

Backhoe loading the topsoil screener
Riser box for the DeSite Screener
Midsize machine loading the rock screener


The 108VFRB is our most versatile screener because it can be fed with both big and small machines. With the riser box installed the feed height is over 10ft. This is the best height for backhoes and loaders. When the screener is on the riser box up to 5 yards of material on each side of the box. This allows for the operator to dig in and get a full bucket of material with out pushing the screener around. When off the riser the 108VF can be fed with smaller machines like skid steers, tractors , and compact loaders.

The screener connects to the riser box with 4” nylon straps. Belts winches are mounted on each corner for ease of access. Removing the screener from the riser box only takes a couple of minutes making the 108 an ease to use versatile screener for all sizes of machines.

Topsoil Screening Machine
Backhoe fed topsoil screener
Screened topsoil falling out the of the back of the screener.


The SLG-108VFRB is 10ft long and 6ft wide. The height of the screener is 10ft 6” allowing it to be moved on trailers with a deck height of up to 36”. If the trailer is taller than 36” the riser box can be removed and stood next to the screener. This brings the height down to 8ft. The weight of the screener is 4500lbs so it can be lifted and loaded onto a trailer with backhoe sized machines. The 108VFRB can be towed with a ½ ton pickup using as small as a 7k trailer.

SLG-108VFRB placeholder image
SLG-108VFRB placeholder image


DeSite SLG screeners are built to get the job done. We go the extra mile to make this screener second to none. We understand that people are skeptical of the quality with a price that is so much lower than our nearest competitor but  remember that you are buying a machine with a lot of middle men marking up the product. We want our customers to be happy. The commitment we make to you is our “Quality Assured Money Back Guarantee”. When you receive your SLG screener take a close look at the construction and quality. If you do not agree that your screener is an awesome value just return the screener and get your money back.


Many customers have said that the SLG-108VF design is so simple that they cannot believe it was not thought of before. We wear these comments as a badge of honor. It is true the SLG-108VF is simple, it has no engine to repair, no fuel tank to fill, and no air filters to clean. The 108 has a 110 volt vibratory system but can also be used as just a spring loaded grizzly. Two C  style springs opposing two coil springs creating kinetic energy is the secret behind the DeSite SLG-108’s success. Changing the screen deck angle is as simple as extending the sloping legs or compressing the deck with your bucket, changing the way materials travel across the screen deck.

Simple wiring
C style sprints
Vibratory pack attachment

Manufacturing Process

We work hard to keep our DeSite screeners the best screening value available. We also strive to make sure that our quality is second to none, so we buy our plate direct from the steel mill, back with their certification. industry. We spend the extra money to laser cut all our plate to ensure a precision fit each and every time. After the laser process is complete, plate is then CNC formed and double checked with bend gauges before the fabrication process begins.  After the fabrication and welding process is complete all sharp edges are ground before we shot blast and powder coat the screener.

Screen Mesh

Many different mesh sizes from 1/8 to 4 “ can be fitted to the SLG-108VF. We offer both square and elongate pattern mesh. Square pattern is primarily used for gravel and rock, while our elongated meshes works best for soils and high moisture materials. All of our mesh is constructed from 65mn steel for maximum wear using double lock crimp dies for tight durable fit.


Due to currency fluctuations prices are in U.S. dollars. We are happy to quote a price in Canadian dollars upon request.