SLG-68V
Topsoil & Rock Screener
$6,250 USD
$7,750 CDN
Compact Bucket Tractors | Smaller Skidsteers | Mini Excavators
1 (877) 254-7903
Bucket Width
Each and every year we strive to improve our designs; 2018 is no exception. DeSite’s model SLG-68V can now be fed with an even wider bucket. This year’s model accommodates buckets up to 66-inches wide, 6 inches wider than our previous models. The inside box dimension has been increased to 73 inches. When using a 66-inch bucket, there are now 9 inches of extra room, making the screener easier than ever to use.
Machine Weight
The big challenge when designing compact screener is to control the machines weight while still building in the structural strength needed for years of service. The new 68V design has accomplished just that with an even bigger screen deck. The SLG weighs in a 1475 pounds.
Cantilevered Deck Suspension
No sacrifices were made in strength and durability when building in the suspension system for the 68V. The SLG 68V comes with the same durable coil and leaf spring system put into our SLG 78VF screening machine.
Check out the photos below. See how much control the operator can have over the slope of the screen deck. A steeper deck angle makes material travel faster for better screening of wet materials. A flatter deck slope slows material flow and works best with gravels, sand, and dry soils.
Vibratory System
The SLG68V comes with our Dual Eccentric (110 volt) 3600rpm Vibratory Pack, the same vibratory power built into our bigger SLG 78VF. The motor and eccentric system is sealed away from the elements and maintenance free. The 68V vibratory pack draws 4 to 5 amps and works off a 15 amp circuit or can be powered with a compact 3500 watt portable generator.
Rubber Screen Deck Skirts
We have installed rubber skirts on each side of the 68V screen deck. The skirts are there to catch stray material falling from the bucket that might miss the deck. We have made the skirts of rubber to bend and flex in case hit by the bucket.
Screen Deck Feeder Plate
Another new feature you will find on the SLG 68V for 2018 is our 8 inch wide feeder plate. The benefit of the feeder plate is to increase efficiency and to make the screener easier to feed. The feeder plate allows the operator to use 100% of the screen deck when feeding the screener
Screener Line Drawings
SLG68VF Front View
SLG68VF Back View
SLG 68VF Machine Specifications
Machine Dimensions
- Screen Box Width: 88 inches
- Screen Box Height: 77 inches
- Screen Box Depth: 48 inches
Weight
- Total Weight: 1475 lbs
Screen Deck
- Screen Deck Width: 68 inches
- Screen Deck Length: 52 inches
- Screen Deck Surface area: 25 sq/ft
- Screen Deck Tilt Angle 45 to 30 Degrees
- Cantilevered screen deck suspension
Screen Deck Suspension
- Cantilevered Coil Over Leaf Spring
Vibratory System
- Vibratory Style Dual Eccentric Armature
- Eccentric Rotation 3600 rpm
- Amperage Draw 5 Amps per motor (3600rpm)
- Eccentric Force 760 lbs per/revolution
- North America 110 Volt ( 60 Hertz )
- Europe 220 Volt ( 50 Hertz )
- South America 110 Volt ( 60 Hertz )
Productivity
- 10 to 20 yards per hour depending upon mesh size,
material, and the size and type of machine feeding the screener.
Square
Mesh Size | Pattern | Product Size |
---|---|---|
5/32" x 5/32" | Square | 1/16" |
1/4" x 1/4" | Square | 1/8" |
3/8" x 3/8" | Square | 1/4" |
1/2" x 1/2" | Square | 3/8" |
1" x 1" | Square | 3/4" |
2" x 2" | Square | 1-1/2" |
3" x 3" | Square | 2" |
4" x 4" | Square | 3" |
Elongated
Mesh Size | Pattern | Product Size |
---|---|---|
3/8" x 4" | Elongated | 1/4" to 5/16" |
1/2" x 4" | Elongated | 3/8" to 7/16" |
3/4" x 4" | Elongated | 1/2" to 9/16" |
1" x 4" | Elongated | 3/4" to 7/8" |
SCREEN AND PRODUCE THE FOLLOWING PRODUCTS
- Recycled Asphalt
- Wood Grindings
- Drainage Rock
- Pipe Bedding
- Topsoil Soils
- Bark Mulch
- Rocks
- Dirt
- Sand
- Gravel
- Compost
- Pea Gravel
- Winter Sand
- Septic Stone
- Decorative Rock